Home > Pruebas de
Corrosión
> Indicadores >


Sistema Carbo Detect ™
Determina la presencia de carbonatación en testigos de concreto.

Sistema Carbo Detect <br> Sistema colorante utilizado para detectar la cabonatación.
Carbo Detect System


 
Questions?
Call us for more information!
Price $210.00

Product Code: I-CB-6000
Qty:

  
Especificaciones
 
The Carbo Detect System is available in Bulk discounts!

Carbo Detect

Carbo Detectsimple colored dye field test for carbonation.




Features & Benefits

  • Test can be carried out completely on site.

  • Gives depth of carbonation.

  • Minimal operator training and no special equipment required.

  • Utilizes only one environmentally safe dye.

  • Results obtained in less than five minutes are easy to interpret.

  • Economic, fast and easy to use.


Field test to identify Carbonation.

Carbo Detect is a simple colored dye field test for detecting carbonation. The single reagent is sprayed on the surface to be checked. The reagent will change to pink in uncarbonated concrete and remain colorless when sprayed on carbonated concrete.


Technical

Carbonation is one of the two main causes of corrosion of steel in concrete, the other is chloride attack. The result of the interaction of carbon dioxide gas in the atmosphere with the alkaline hydroxides in the concrete, the carbonation process effectively drops the pH of the concrete to a level where the steel will corrode. The carbon dioxide dissolves in water to form carbonic acid, which can migrate to the reinforcing steel if the concrete cover is low or if the concrete is of poor quality (open pore structure, low cement content, high water cement ratio, or poor curing of the concrete). Carbonation is more common in old structures, particularly buildings.


Method

Carbo Detect reagent is a type of pH indicator which will indicate the change of pH on a freshly exposed concrete surface. The indicator is simply sprayed on the surface to be checked. The indicator will change to pink in uncarbonated concrete and remain colorless when sprayed on carbonated (low pH) concrete. If the concrete test area is very dry, a light misting with water will help show the color.

By spraying the indicator along a core drilled from the top surface down to the reinforcement bar it can be readily seen how far the carbonation has progressed and therefore the outlook for corrosion, which will only occur after carbonation reaches the reinforcement bar.

Care should be taken to prevent drilling and coring dust from contaminating the surface to be tested.


Components

CB-6000 Test Kit

  • 200 ml of reagent - sufficient for approximately 100 test

  • Sprayer

  • Carrying Case


Downloadable Document



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pruebas de
Corrosión
> Indicadores
Pruebas de
Corrosión